Klüber Staburags NBU 8 EP
[:en]
Klüber Staburags NBU 8 EP
Klüber Staburags NBU 8 EP Is a rolling bearing and high-pressure grease.
Benefits for your application
– Good corrosion protection
– Good resistance to ambient media
– Good wear protection / EP properties
– Protects against tribo-corrosion
– High-pressure grease
Description
STABURAGS NBU 8 EP is a lubricating grease based on mineral oil and barium complex soap. It has been used successfully for many years as a long-term grease for bearings subject to high specific loads. Its good wear protection properties are enhanced by the barium complex thickener. STABURAGS NBU 8 EP protects reliably against corrosion and is resistant to water. It meets the requirements of DIN 51 807, dated May 1970: SKF-R2F test, test run B, 140 °C, and it achieves about 4000 operating hours in the SKF-ROF test at 120 °C.
Application
STABURAGS NBU 8 EP has proven efficient as a rolling bearing and high pressure grease protecting against wear. It is used in traction motors, journal bearings, electric motors, pumps, and tapered roller bearings.
Application notes
The product is applied by brush, spatula or conventional metering systems.[:de]
Klüber Staburags NBU 8 EP
Ist ein Wälzlager- und Hochdruckfett
Wälzlager- und Hochdruckfett
Vorteile für Ihre Anwendung
– guter Korrosionsschutz
– gute Medienbeständigkeit
– hoher Verschleißschutz/EP-Eigenschaften
– gute Wirkung gegen Tribokorrosion
– Hochdruckfett
Beschreibung
STABURAGS NBU 8 EP ist ein Schmierfett auf Basis von Mineralöl und Barium-Komplex-Seife. Dieses Spezialfett ist seit Jahren bewährt für Langzeitschmierung bei hoher spezifischer Lagerbelastung und zum Schutz gegen abnormalen Lagerverschleiß. Die verschleißmindernde Wirkung wird durch den Verdicker Barium-Komplex positiv unterstützt. Das Produkt verfügt über eine gute Korrosionsschutzwirkung und Wasserbeständigkeit. SKF-R2F-Prüfung nach DIN 51806 vom Mai 1970 mit Prüflauf B bei 140°C erfüllt. SKF-ROF-Prüfung bei 120°C ca. 4000 h.
Anwendungsgebiete
STABURAGS NBU 8 EP ist bewährt als Wälzlager- und Hochdruckfett mit Verschleißschutz zur Schmierung von Fahrmotoren, Achslagern, Elektromotoren, Pumpen und vor allem für Kegelrollenlager.
Anwendungshinweise
Produkt ist mit Pinsel, Spatel oder üblichen Dosiersystemen gut an der Schmierstelle auftragbar.[:]