AEROSHELL Fluid 3
[:en]
AEROSHELL Fluid 3
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.
Main Applications
-
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush.
For this reason it is also described as ‘an oilcan lubricant’.
-
Operating temperature range of AeroShell Fluid 3 is -540C to +1210C.
-
For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Specifications, Approvals & Recommendations
-
Approved MIL-PRF-7870D (US)
-
Approved DEF STAN 91-47 (British)
-
NATO Code O-142
-
Joint Service Designation OM-12
Looking for any other schmierstoffe product in AEROSHELL LUBRICANTS or other Lubricant ? Just give us a call.[:de]
AEROSHELL Fluid 3
AeroShell Fluid 3 is a general purpose mineral lubricating oil recommended for general lubrication of aircraft parts that require a light oil with good low temperature characteristics and a low freezing point. It is inhibited against oxidation and corrosion. AeroShell Fluid 3 is a relatively low viscosity product with good resistance to evaporation.
Main Applications
-
AeroShell Fluid 3 is recommended for general lubrication of aircraft parts that require a light oil, e.g. hinges, pivot joints, shaft joints, linkage pins and bearings, pulleys, cables, camera mechanisms, radio and radar gear and instruments. AeroShell Fluid 3 is normally applied by means of an oil can or brush.
For this reason it is also described as ‘an oilcan lubricant’.
-
Operating temperature range of AeroShell Fluid 3 is -540C to +1210C.
-
For high temperature applications where no provision is made for frequent re-lubrication the synthetic oil, AeroShell Fluid 12, should be used in place of the mineral oil, AeroShell Fluid 3; however in this case care should be taken to ensure that there is no incompatibility between AeroShell Fluid 12 and seals, paints etc.
Specifications, Approvals & Recommendations
-
Approved MIL-PRF-7870D (US)
-
Approved DEF STAN 91-47 (British)
-
NATO Code O-142
-
Joint Service Designation OM-12
[:]